Gas furnace blower on a power station: what you need first
A gas furnace blower is hardwired and needs a big start burst. Get an electrician to set it up safely before you size a battery.
Check this in the calculatorGas furnace blower, 24 hours (assumed 35% duty) Safety first. A furnace blower is hardwired, not plugged in. Connecting it to a battery needs an interlock or transfer switch installed by a licensed electrician. Never backfeed a house circuit by plugging a station into an outlet or a dryer or generator inlet. Check the furnace data plate for a pure sine-wave requirement. Many modern blowers need one.
The numbers (1/2 hp PSC blower)
- Running: 875 W (range 300 to 875).
- Start we test against: 2,350 W (range 800 to 2,350), the high end.
- Duty: 35% is our assumption for a cold-weather hour (range 20 to 60%). It depends on furnace size and outdoor temperature. You can edit it.
- Energy at 35% duty: about 7.4 kWh per 24 h (875 W x 0.35 x 24 h, computed from the assumption).
- A 1/3 hp blower runs about 700 W (Honda and Reliance figure via a third party).
These are generic generator-maker chart values. The furnace data plate beats them.
Models we cannot confirm
Bluetti Elite 200 V2, Bluetti Elite 300, Anker SOLIX C1000 and Bluetti Elite 100 V2 publish no motor-start rating. They show motor start unverified. Within 50 W of a rating is unconfirmed. A blower also needs the furnace controls powered, so ask the electrician what else is on the circuit.
What this does not cover
- Electric resistance heat, heat pumps and boilers need far more power than a station provides.
- Carbon monoxide: never run a fuel generator indoors. Keep working CO alarms.
- Your furnace maker or installer decides what backup power is allowed.
Which models pass for a 1/2 hp furnace blower
Setup: Gas furnace blower, 24 hours (assumed 35% duty). Gas furnace blower (1/2 hp, PSC), 875 W avg (24 h/day).
| Model | Wh | Runtime | Result | Price (checked on) |
| Bluetti Elite 30 V2 | 288 Wh | about 0.5 h | No too many watts ✗ continuous 875/600 W · ✗ start 2350/600 (no motor rating) W motor start unverified | $299.99 2026-11-21 |
| EcoFlow RIVER 3 Plus | 286 Wh | about 0.5 h | No too many watts ✗ continuous 875/600 W · ✗ start 2350/1200 W | $279 2026-11-02 (stale) |
| Jackery Explorer 240 v2 Sold out | 256 Wh | about 0.5 h | No too many watts ✗ continuous 875/300 W · ✗ start 2350/600 W | $249 2026-11-21 |
| Bluetti Elite 100 V2 | 1024 Wh | about 2.5 h | No cannot start the motor ✓ continuous 875/1800 W · ✗ start 2350/1800 (no motor rating) W motor start unverified | $449.99 2026-11-21 |
| Jackery Explorer 1000 v2 Sold out | 1024 Wh | about 2.5 h | No not enough Wh ✓ continuous 875/1500 W · ✓ start 2350/3000 W | $559 2026-11-21 |
| EcoFlow DELTA 3 Plus Preorder | 1024 Wh | about 2.5 h | No not enough Wh ✓ continuous 875/1800 W · ✓ start 2350/3600 W | $719 2026-11-21 |
| Anker SOLIX C1000 | 1056 Wh | about 2.5 h | No not enough Wh ✓ continuous 875/1800 W · ? start 2350/1800 (no motor rating) W motor start unverified | $499.99 2026-11-21 |
| Anker SOLIX C1000 Gen 2 Preorder | 1024 Wh | about 2.5 h | No not enough Wh ✓ continuous 875/2000 W · ✓ start 2350/3000 W | $469.99 2026-11-21 |
| Jackery Explorer 1500 v2 | 1536 Wh | about 3.5 h | No not enough Wh ✓ continuous 875/2000 W · ✓ start 2350/4000 W | $949 2026-11-21 |
| Jackery Explorer 2000 v2 | 2042 Wh | about 5 h | No not enough Wh ✓ continuous 875/2200 W · ✓ start 2350/4400 W | $999 2026-11-21 |
| Bluetti Elite 200 V2 | 2074 Wh | about 5 h | No not enough Wh ✓ continuous 875/2600 W · ? start 2350/2600 (no motor rating) W motor start unverified | $899 2026-11-21 |
| Anker SOLIX C2000 Gen 2 Preorder | 2048 Wh | about 5 h | No not enough Wh ✓ continuous 875/2400 W · ✓ start 2350/4000 W | $849.99 2026-11-21 |
| Bluetti Elite 300 | 3014 Wh | about 7 h | No not enough Wh ✓ continuous 875/2400 W · ? start 2350/2400 (no motor rating) W motor start unverified | $1,099 2026-11-21 |
| EcoFlow DELTA Pro 3 Sold out | 4096 Wh | about 9.5 h | No not enough Wh ✓ continuous 875/4000 W · ✓ start 2350/8000 W | $2,799 2026-11-21 |
| Goal Zero Yeti 1500X Discontinued | 1516 Wh | about 3.5 h | No not enough Wh ✓ continuous 875/2000 W · ✓ start 2350/3500 W | $1,124.89 2026-11-21 |
Typical, editable figures, not measured. 90% usable depth, 85% inverter efficiency, plus idle draw. Method.
Updated 2026-11-21 (draft)
Related
Sources (2)